Ashdown ABM C115 500 Evo III 575w Bass Combo, Secondhand

Ashdown ABM C115 500 Evo III 575w Bass Combo, Secondhand


575w, 1x15 Bass Combo
Used Bass Combo

Key Points
  • 575W Bass Combo
  • 1 x 15" Ashdown BlueLine
  • HF Horn
  • High-grade Birch Ply Build

  
Manufacturer: Ashdown
Availability: In Stock
Discount Price: £595.00
Share |

BUY IT NOW FOR £595.00 Add to Cart

Ashdown ABM C115 500 Evo III 575w Bass Combo, Secondhand

575w, 1x15 Bass Combo

THIS IS A USED/PRE-OWNED/SECONDHAND BASS AMP COMBO IN FULL WORKING ORDER/GREAT CONDITION. CALL OUR BASS DEPARTMENT ON 01524 410202 FOR MORE DETAILS.

 

The ABM C115H-500 EVO III combo combines the features of the ABM 500 EVO III head with a 15" Ashdown BlueLine™ driver with an HF horn. The precision tuned cabinet is constructed from high-grade birch ply, protected by a tough, buffalo leather cloth covering, metal corners and steel grilles. Heavy-duty rubber feet are used to reduce vibration. Like all ABM EVO III amps, the amplifier chassis is built from heavy-duty 16 swg zinc coated mild steel, foil lined to minimise interference.

ABM bass amps are designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamp stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.

Also footswitchable is the on-board compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone.

The 575W ABM C115-500 EVO III combo features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise.

Specs

Power Output (RMS) 575W
Power Requirement 230 / 115V
Speaker Configuration 1 x 15" bass driver
Frequency Response -3dB at 17Hz and 30kHz
Speaker Outputs Minimum impedance 4 Ohms
High Instrument Input Impedance 3.9m Ohms, input range 150mV - 20mV p-p
Low Instrument Input Impedance 10k Ohms, input range 300mV - 40V p-p
Line Input Impedance 22k Ohms, input level 0dBu nominal
Sub Output Impedance 1k Ohms, level 0dBu Nominal
DI Output 600 Ohms balanced, level 0dBu nominal
Tuner Output Impedance 22k Ohms, level 0dBu nominal
EQ Bass +/-15dB @ 45Hz
Middle +/-15dB @ 660Hz
Treble +/-15dB @ 7kHz shelving
Slider 1 +/-15dB @ 180Hz
Slider 2 +/-15dB @ 340Hz
Slider 3 +/-15dB @ 1.3kHz
Slider 4 +/-15dB @ 2.6kHz
Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave
Effects Send Impedance 22k Ohms, level 0dBu nominal
Effects Return Impedance 22k Ohms, input level 0dBu Nominal
H x W x D (mm) 587 x 610 x 335
Weight (kg) 28



Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.

#
Shop by Brand
The Store
sagepay