ElectroVoice ZXA5 Powered Speakers (Pair)

ElectroVoice ZXA5 Powered Speakers (Pair)

Pair Of Powered PA Speakers In ABS Cabinets, Two Way, 1 x 15 Inch Speakers, Powered 1000W Low Freq & 250W High Freq, Switchable Hi-Pass Filter

The Electro-Voice® ZxA5 is the new standard of no compromise audio performance and versatility in a simple to use, compact package.
At its heart are the transducers. First is the DVX3150 high performance low frequency transducer. EV used advanced
computer aided design techniques to create forced air, directional voice coil cooling for high power and efficiency. Finite element
analysis was used to optimize the suspension and magnetic structure for long, linear travel to provide low distortion and greater LF
extension. These features and details, such as forged magnetic components and special materials, provide reliability in a lightweight
transducer. Next is the ND2, a 2-inch voice coil compression driver based on neodymium motor structure to allow for maximum output
while reducing size and weight to a minimum. Its precision phasing plug and titanium diaphragm provide better HF performance, while
the integral heatsink provides cooling for high power output. The high tech enclosure uses injection-molded high-impact
polypropylene structural foam to make the ZxA5 incredibly durable. The enclosure geometry elements have been carefully designed to
provide maximum rigidity and bass response. By design the ZxA5 is also a perfect solution for stage monitors by allowing two angles
(45° or 55°) without any additional accessories. The ZxA5 has an integrated high output, lightweight digital amplifier that produces 1000W LF and 250W HF. The very low noise design includes a 24 dB/octave 100 Hz high pass filter for use with a sub, the perfect match being the Plasma P2 18” Powered Subwoofer. The ZxA5 is equipped with three anchor plates for rigging with single stud-fittings, along with two more possible anchor plate attachment points on the bottom. For permanent suspension or attaching brackets, the ZxA5 also has two M8 inserts on the top and bottom, two under the handle, and four on the back of the enclosure, for a total of 10. All versions are available in black or white.

Specs

• Freq. Response1(-3 dB): 58 Hz - 18 kHz
• Freq. Range1(-10 dB): 50 Hz - 20 kHz
• Max Calculated SPL: 133 dB
• Horizontal Coverage: 90°
• Vertical Coverage: 50°
• LF Amplifier Power: 1000W
• HF Amplifier Power: 250W
• LF Transducer: DVX3150, 15in (300mm) Driver
• HF Transducer: ND2-16, 1in. (25.4mm) exit Neodymium
• Compression Driver
• Crossover Frequency: 1.5 kHz
• Input Connector: XLR and 1/4" TRS Combination
• Output Connector: XLR
• Power Requrement: 110-130 VAC, 50-60 Hz, or 220-
• 240VAC, 50-60 Hz
• Enclosure Material: Polypropylene Structural Foam
• Suspension: Enclosure has locations for 5 SingleStud
• Attatchment Plates and 10 Forged
• Steel Eyebolts - 2 on Top, 2 on Bottom,
• 2 on Side, and 4 on Rear of Enclosure
• Grille: Polyester Powder Coated, 16GA
• Galvanized Steel
• Dim (H x W x D): 27.26" x 17.57" x 16.16"
• (692mm x 446mm x 411mm)
• Net Weight: 50.5 lbs (22.9 kg)
• Shipping Weight: 58.9 lbs (26.7 kg)

---

Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.