Prolight Equinox Mega Bar System DJ Lighting

Prolight Equinox Mega Bar System DJ Lighting

Equinox Mega Bar System DJ Lighting - Lightweight and robust yet very compact. Four identical LED arrays are fitted to a T-bar, which also houses the electronics, including a mode display and buttons for Menu, Up and Down.

The Mega Bar houses 28 Mega bright 3W Tri colour LEDs consuming 115W. This system is ideal for bigger venues or stages needing the extra output and improved colour mixing the 3W Tri LEDS offer.

The system has full DMX control and can be set to any one of 15 DMX channels although it is likely that most users will rely on the footswitch and the automatic modes. If more lighting bars are required, they can be connected in master/slave fashion using standard XLR cables. The footswitch unit is gratifyingly robust, with a folded steel case and very substantial switches. There are four switches in all, which are labelled: Preset, Sound, Hold and Blackout. Preset mode steps through nine options, which comprise of seven static colour choices, an automatic colour change, or a morph between colours. When Sound is activated, the unit is triggered from a microphone built into the T-bar, which has its own sensitivity control. In this mode the system steps through a series of built-in chases with some involving individual arrays being switched on and off, and others involving all the arrays in a colour change sequence. Hold freezes the current lighting state, whereas Blackout kills all the lamps.

Each array sits in an adjustable bracket, giving plenty of vertical and horizontal adjustment, and connects to the T-bar via a locking connector that can remain in place when packing. The T-bar itself fits onto the included tripod stand and comes supplied in its own road bag. The rest of the system fits into the padded zip-up case, which has a side pocket large enough to hold the footswitch.

Equinox Mega Bar System DJ Lighting Main Features:

    DMX channels: 2, 3, 4, 7, 8, 14, and 15 selectable
    LEDs: 28 Mega Bright 3W Tri-colour LEDs
    Individual tilt & swivel on each panel
    Beam angle: 40 degrees
    3-Pin XLR In/Out sockets for DMX
    1/4" jack foot switch socket
    Slimline design
    DMX 512 compatible
    Linkable - connect multiple kits to one controller
    Height adjustable stand
    All metal design
    Ultra low heat output
    No duty cycle
    Power: 240V
    Power consumption: 115W
    Dimensions: 1280 x 380 x 110mm
    Weight: 16Kgs

Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.