Yamaha MW8CX
USB Mixer Interface
If you have a computer -laptop or desktop, Windows™ or Macintosh™ -and you want to make music with it, we've got the setup for you. The new MW USB Mixing Studio series mixers give you everything you need to turn your computer system into a complete, full- featured, high-performance home recording studio. The new MW uses a single cable USB connection to interface with your computer, for bi-directional audio data transfer. It gives you comprehensive signal input and mixing features in a compact size. It also includes the powerful Cubase AI4 music production software, allowing you to capture your performances, embellish and enhance them with plug-in synths and effects, and mix them down to stereo. In other words, the MW gives you all the elements of a recording system, one that is remarkably easy to set up and operate.
Features
SINGLE USB CONNECTION, INSTANT STUDIO
With Yamaha's new MW10C and MW8CX USB Mixing Studio mixers, making great music is easier than ever before. Combined with the powerful Cubase AI4 audio/MIDI sequencing software, the new MW series provides a comprehensive tabletop studio setup for the solo recording musician and for the travelling producer/arranger. Connect the new MW to a USB terminal on your laptop or desktop computer, and you've got an instant, high-quality audio recording studio at your command. The MW delivers true plug-and-play USB audio input/output interfacing-without the need for special software drivers-and lets you easily record mono inputs or two- track stereo mixes of multiple sources to your computer.
FLEXIBLE 8-CHANNEL AND 10-CHANNEL CONFIGURATIONS
The MW8CX gives you a total of eight inputs, including four ultra-low-noise mic preamps. The MW10C gives you an additional stereo channel for a total of ten inputs. The high-performance balanced microphone inputs also have a phantom power switch, allowing you to take advantage of the superior sonic quality of professional-level condenser microphones.
EASY-TO-USE 1-KNOB COMPRESSION
Compression-the taming of wildly varying levels in vocals, bass and guitar-is one of the most important effects used in recording and mixing. It is also one of the most subtle and difficult to use. Not with the new MW series mixers, however. The innovative 1-knob analog compressor (on the mono input channels) lets you dial in just the amount of compression you need in recording, without having to set multiple parameters like threshold, ratio and makeup gain. One knob does it all for you-instantly giving you great, punchy sound.
MONITOR MIX
This convenient feature gives you simple control over the balance between the signals being recorded and the playback signals being monitored. This is particularly helpful when recording several sources at the same time, letting you use a single knob to adjust the balance of the playback and recording signals for monitoring purposes. Naturally, this doesn't affect the recording level; it simply allows you to control what you want to hear.
EASY-ACCESS PANEL AND HIGH-QUALITY PARTS
Top-mounted input and output connectors make setting up and re-patching your system quick and easy. Both models feature high-quality NeutrikTM balanced XLR connectors for the microphone inputs. Long-throw, smooth-action faders give you precise and tactile control over signal levels. The mixer also has a bright and large 12-segment LED meter for visual signal indication.
CHANNEL ON SWITCHES
Dedicated On switches for each channel let you enable or disable (mute) individual input channels as desired, while the lamps on the switches give you instant visual indication about which channels are on.
BUILT-IN SPX EFFECTS
For those who like the convenience of having signal processing right inside the mixer, the MW8CX and MW12CX incorporate a versatile digital multi-effect unit that provides a variety of reverb, delay, modulation, and distortion programs you can use to enhance your sound, or completely transform it-without the need for an external device. Each of the 16 effect programs has a number of editable parameters as well as effect on/off switching capability and return level control. If you need to keep both hands free to play an instrument or perform other operations, an optional footswitch can be connected to the mixer's effect footswitch jack for convenient on/off switching.
Specs
Size/Weight
|
Dimensions |
Width |
256.6mm |
|
Height |
62.2mm |
|
Depth |
302.5mm |
|
Weight |
Weight |
1.7kg |
Control Interface
|
Other Controllers |
Dial |
No |
General Specifications
|
Sampling Frequency Rate |
44.1, 48 kHz, Depend on the application of PC |
|
Frequency Response |
ST OUT, REC OUT, AUX (EFFECT*) SEND, MONITOR OUT = -3.0, 0, 1.0 dB, GAIN: min(CH 1-2, CH 3/4-5/6), 20Hz-20kHz, refer to the nominal output level @1kHz |
|
Total Harmonic Distortion |
ST OUT = Less Than 0.1 %, +14dBu, 20Hz-20kHz, Input Gain Control at minimum |
|
Cross Talk |
-70 dB, STEREO L/R, CH 1-2, PAN panned Hard left or right. |
Storage and Connectivity
|
Connectivity |
Headphones |
PHONES(Stereo phone type) |
|
Microphone |
CH INPUT MIC 1,2(XLR-3-31 type),ST CH MIC INPUT 3-4,5-6(XLR-3-31 type) |
|
LINE OUT |
REC OUT(RCA pin type),STEREO OUT L,R(TRS phone type) |
|
OPTICAL OUT |
No |
|
USB TO HOST |
Yes |
Power Supply
|
Power Consumption |
21W |
|
Phantom Power |
DC+48 V |
System Requirements
|
Windows |
CPU |
Windows Vista = 1 GHz or better Intel Core / Pentium / Celeron processor,Windows XP = 750 MHz or better Intel Core / Pentium / Celeron processor |
|
Support OS |
Windows Vista / Windows XP Professional / XP Home Edition |
|
Memory |
Windows Vista = 1 GHz or better Intel Core / Pentium / Celeron processor,Windows XP = More than 128 MB |
|
Macintosh |
PC |
Windows-based computer with built-in USB interface |
|
CPU |
Macintosh G3 processor 300 MHz or better |
|
Support OS |
Mac OS X 10.3.3 or higher |
|
Memory |
More than 128 MB |
Bundled Software
Accessories
|
Included Accessories |
Power Adaptor |
Power adaptor |
|
Cable |
USB cable |
|
Others |
DVD-ROM (CUBASE AI4),Owner's Manual set |
General Specifications
|
CH EQ |
High = 10 kHz shelving (CH 1-2, CH 3/4-5/6) Mid = 2.5 kHz peaking (CH 1-2, CH 3/4-5/6) Low = 100 Hz shelving (CH 1-2, CH 3/4-5/6) High = 100 Hz shelving (CH 1-2, CH 3/4-5/6) Low = 100 Hz shelving (CH 7/8, CH 9/10**) +15,-15dB maximum.Turn over/roll-off frequency of shelving:3dB blow maximum variable level. |
|
High Pass Filter |
CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct |
Storage and Connectivity
|
Storage |
Floppy Disk Drive |
No |
|
Internal Memory |
No |
|
Hard Disk Drive |
No |
|
External Drives |
No |
|
Optional Memory |
No |
|
SmartMedia Slot |
No |
|
Connectivity |
DC IN |
DC IN |
|
Foot Switch |
FOOT SW |
|
AUX IN |
CH INSERT IN(TRS phone type),RETURN L,R(Phone type) |
|
AUX OUT |
EFFECT SEND(TRS phone type) |
|
MONITOR OUT |
MONITOR OUT L,R(TRS phone type) |
|
TO HOST |
No |
|
USB TO DEVICE |
No |
|
Others |
CH INPUT LINE 1,2(TRS phone type),ST CH LINE INPUT 3/4,5/6(Phone type),ST CH INPUT 7/8(Phone type/RCA pin type),2TR IN(RCA pin type) |
Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.
