MarkBass Nano Mark II Bass Amp Head

£392.00
£490.00

Ultra-portable bass amp head

Evolved from the Nano Mark 300 amplifier.

  • Ultra-compact Size
  • New Bi-Band Limiter
  • XLR Out, Pre-Post EQ
  • Only 1.45Kg
Out of Stock - 01524 410202
Free UK shipping on applicable items
  • Found it cheaper elsewhere? Contact us to see if we can beat their price!
  • Call us for experienced and friendly advice
Safe Checkout

Mark Bass Nano Mark II – 300 Watts @ 4 Ohms

 

NANO MARK II

 

The NANO MARK II has evolved from our Nano Mark 300 amplifier, adding many useful features. It keeps the same powerful sound in an ultra-compact size and same lightweight package of its famous predecessor (only 3.20lbs/1.45 kg). The new bi-band limiter featured on this amp responds faster and more dynamically to your playing, giving a more natural sound. Plus, thanks to an optional single footswitch you can easily have access to a scooped-mid EQ setting and quickly get a tight tone for slap or pick bass!

 

KEY POINTS

 

Power-to-weight ratio / ultra-portable amp

NANO MARK II is a professional grade amp weighing only 3.20 lbs / 1.45 kg and has an unbelievable power-to-weight ratio with 300W from its MPT power amp in a remarkably small and lightweight package. This amp is perfect for bassists searching for portability without sacrificing the rich and warm tones unique to Markbass.

 

Simple design

This amp is ideal or those who need a myriad of tone shaping on the go. Thanks to its simple and effective controls you can get a clear, loud, defined EQ resulting in an authentic reproduction of your bass guitar's sound. Scooped-mid EQ ideal for slap and pick bass tones are available using an optional single footswitch connected to the dedicated input on the rear panel.

 

Bi-band limiter

Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do and lets your high end "breathe" for a more natural sound. It makes our amp heads the best choice for anyone who enjoys a quick, punchy attack at high volumes.


MPT – MARK PROPRIETARY TECHNOLOGY

Many other bass amps on the market use power amps that are not specifically designed for bass. At Markbass, Marco De Virgiliis invested heavily in R&D to develop a proprietary power amp technology in house. When compared against the competition, all Markbass amps feel unique, with a more defined sound and more power. Our MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument.

 

XLR Out, Pre/Post EQ, FX send/return, Footswitch

A balanced XLR Line Out with Pre/Post EQ and GND Lift switches, effect send and return, Footswitch input and quarter inch/Speakon speaker output – truly a feat of engineering – even we find it hard to believe all of these fit in such an ultra-small head.

 

 

INPUTS

INPUT impedance: 1 Mohm, max. voltage: 15 Vpp

RETURN impedance: 33 Kohm, max. voltage: 10 Vpp

 

CONTROLS

GAIN –60 dB to +23 dB range

PRE/POST EQ (for line out) switch on rear panel

GROUND LIFT switch on rear panel

FOOTSWITCH (not included) for flat/scooped switch

MASTER VOLUME

 

EQUALIZATION

LOW: center frequency 60 Hz; level: ±16 dB

MID LOW: center frequency 360 Hz; level: ±16 dB

MID HIGH: center frequency 800 Hz; level: ±16 dB

HIGH: center frequency 5 kHz; level: ±16 dB

 

OUTPUTS

SEND EFFECTS: unbalanced, max. voltage 20 Vpp (Pre Eq)

LINE OUT balanced XLR, Maximum Voltage 10 Vpp, Impedance 600 ohm

SPEAKER OUT: speakon/1/4” combo

 

DIMENSIONS AND WEIGHT

WIDTH: 7.87 in. / 20 cm

DEPTH: 8.27 in. / 21 cm

HEIGHT: 2.09 in. / 5.3 cm

WEIGHT: 3.20 lbs / 1.45 kg

 

OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm 

 

POWER REQUIREMENT: 100/120V; 230V; 240V  50/60Hz (Voltage is factory preset according to region of sale)

 

OTHERS

BI-BAND LIMITER

FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID

 

Minimum ohm load for all Markbass heads is 4 ohms.

Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.

Rack ears do not come included with this head.

Product specifications are subject to change without notice. 

Additional information

Dimensions 0.00 × 0.00 × 0.00 cm
Manufacturer