Markbass Little Mark Vintage Bass Amp Head

£699.00
£874.00

For both modern tones or old school ones.

Utilising Markbass’ 18 years of bass amp-making experience.

  • 500W
  • Tube Preamp
  • Limiter Control
  • 2.5 Kg
Out of Stock - 01524 410202
Free UK shipping on applicable items
  • Found it cheaper elsewhere? Contact us to see if we can beat their price!
  • Call us for experienced and friendly advice
Safe Checkout

 

 

The Little Mark Vintage is the result of years of experience and it was designed to really let everybody find their own tone, no matter the needs or personal taste, offering lots of sound options and features really satisfying all bass players searching for both modern tones or old school ones.

This one is part of the Gold Series, a state of the art lineup offering superior quality, recognizable by its catching new look marking a new era at Markbass, starting from gold plated circuits, to the highly selected components, to some of the most requested features!

 


INPUTS

    INPUT: impedance 500 Kohm, max. voltage 9 Vpp
    EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

    GAIN: -46 dB to +23 dB range
    MASTER VOLUME 
    DI LEVEL
    LIMITER (from 0 to MAX)
    GROUND LIFT (switch on rear panel)
    PRE/POST EQ (switch on rear panel)
    3-WAY SWITCH (FLAT/CUT/OLD)

EQUALIZATION

    LOW: center frequency: 68 Hz; level: ±16 dB
    LOW MID: center frequency: 400 Hz, level: ±16 dB
    HIGH MID: center frequency: 2200 Hz, level: ±16 dB
    HIGH: center frequency: 10 KHz, level: ±16 dB

OUTPUTS

    LINE OUT / DI: balanced XLR, 600 Ohm transformer output – Maximum Voltage 12 Vpp
    EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
    TUNER OUT: unbalanced, max. voltage 2 Vpp
    SPEAKER OUT: speakon combo, 1/4"

OTHER

    WEIGHT: 5.51 lbs / 2.5 Kg
    WIDTH: 10.87 in. / 27.6 cm
    DEPTH: 9.84 in. / 25 cm
    HEIGHT: 3.27 in. / 8.3 cm
    OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
    POWER REQUIREMENT:100/120V; 230V; 240V – 50/60Hz (Voltage is factory preset according to region of sale)

Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
Product specifications are subject to change without notice.

Additional information

Dimensions 0.00 × 0.00 × 0.00 cm
Manufacturer