Bose L1 Model 1S System With B2 Bass Module & T4S ToneMatch Mixer

Manufacturer: Bose
Availability: Accessory - To Order
Normally: £2,066.00
Discount Price: Call Us
Share |

Bose L1 Model 1S System With B2 Bass Module & T4S ToneMatch Mixer


Top quality all in one PA System ideal for singer-songwriters
Complete With Bags, Cover & Leads

Key Points
  • For Audiences Up To 300
  • 12 Speaker Line Array
  • 180 Degree Sound Coverage
  • Easy To Set Up & Breakdown

  

Bose L1 Model 1S System With B2 Bass Module & T4S ToneMatch Mixer

Top quality all in one PA System ideal for singer-songwriters

L1® Model 1S with B2 bass

  • Recommended for audiences up to 300
  • 12-speaker articulated line array delivers 180-degree horizontal sound coverage
  • Produces the most consistent tonal balance with less volume drop-off over distance
  • System's interconnecting pieces allow for easy transport, setup and breakdown
  • B2 bass module included

Spend less time setting up your gear and more time enjoying it. The new L1® Model 1S portable line array system delivers a potent combination of portability and performance. It's compact and light enough to make setup quick and easy, yet powerful enough to fill a mid-sized venue. Includes one B2 bass module for more flexibility and even greater power at the low end. This system works well for solo musicians, bands and public speakers. Includes one B1 bass module for enhanced low-end performance.

Put your PA behind you

The vertical configuration of the system's small, closely spaced drivers allows the L1® Model 1S system to project sound forward and to the sides - delivering 180-degree coverage—but very little up and down, reducing unwanted reverberation. This produces consistent tonal balance as sound spreads more evenly across the stage and into the audience, and the volume level drops off much more slowly than with a conventional speaker.

Unique Bose® technologies enable the system to serve as both PA and monitor. It can be positioned behind or to the side of the performer - and you hear just what the audience hears. You're in control, and there's no need for conventional monitors, mixers and PA systems.

Convenience to go

The three components of the L1® Model 1S system - upper array, lower extension and power stand - connect quickly and easily without the need for separate speaker stands. Setup and breakdown take just minutes. And everything stores neatly into the included carry bags, making transport easy, too.

Full, flexible bass

The high-performance B2 bass module delivers greater low-frequency output when you need more powerful bass for larger audiences. The module includes three settings for increased flexibility. The normal setting is ideal for bass guitar or when mic’ing a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals.

Multichannel flexibility

The T4S ToneMatch® audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch® engine to fine-tune your sound with powerful, proprietary tone-shaping tools.

(If you require more channels. the T8S is also available for £749).


Dimensions
L1 Model 1S top array

43.5"H x 3.5"W x 4"D ( 111 cm x 9 cm x 10.5 cm )

16.3 lbs (7.4 kg)
L1 Model 1S bottom extension

39.63"H x 4.15"W x 4.13"D ( 100.6 cm x 10.6 cm x 10.5 cm )

8.5 lbs (3.8 kg)
L1 Model 1S power stand

5"H x 10"W x 27"D ( 12.8 cm x 26.2 cm x 69.2 cm )

25.1 lbs (11.4 kg)

 

FOR ADVICE AS TO WHAT CONFIGURATION OF BOSE SYSTEM IS BEST FOR YOU, GIVE US A CALL ON 01524 410202.




Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.

#
Shop by Brand
The Store
sagepay