Markbass Little Mark Tube Bass Guitar Valve Amplifier Head, 500 Watts, 4 Ohms, 4- Band EQ, Variable Pre-Shape Filter, Vintage Loudspeaker Emulator.
The Markbass Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp…or a mix of both!
On the front panel there are also two inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or 1/4" input.
Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four band EQ, VLE and VPF filters, line out level control, pre/post EQ switch for the XLR out (on rear panel) and mute control (push-pull on the master volume knob).
The Markbass Little Mark Tube features:
- INPUT 1 impedance 500 Kohm, max. voltage 15 Vpp
- INPUT 2 (Balanced XLR/1/4" combo) balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
- EFFECT RETURN impedance 33 Kohm, max. voltage 10 Vpp
- GAIN 1 and 2 -60 dB to +23 dB range
- Tube and solid state gain can be mixed
- Other controls: MASTER VOLUME, LINE OUT LEVEL
- GROUND LIFT switch on rear panel
- PRE/POST EQ switch on rear panel
- MUTE push/pull on master knob
- LOW EQ center frequency: 40 Hz; level: ±16 dB
- LOW MID center frequency: 360 Hz, level: ±16 dB
- HIGH MID center frequency: 800 Hz, level: ±16 dB
- HIGH center frequency: 10 kHz, level: ±16 dB
- VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut)
- VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut)
- LINE OUT balanced XLR, max. voltage 20 Vpp
- EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ)
- TUNER OUT unbalanced, max. voltage 2 Vpp
- SPEAKER OUT speakon/1/4" combo, 1/4"
- WEIGHT 6.55 lbs / 2.97 kg
- Dimensions: DEPTH 10.1 in. / 25.6 cm, WIDTH 10.87 in. / 27.6 cm, HEIGHT 2.8 in. / 7.1 cm
- OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm