Roland UA1010 Octa-Capture USB Audio Interface 10 In X 10 Out

Manufacturer: Roland
Availability: Out of Stock - 01524 410202
Normally: £483.00
Discount Price: £459.00
Share |

Normally £483.00
Saving you £24 (5% Off)
BUY IT NOW FOR £459.00 Add to Cart

Roland UA1010 Octa-Capture USB Audio Interface 10 In x 10 Out


Features ten inputs, ten outputs, eight VS PREAMPS, and superb 24-bit/192 kHz audio quality, OCTA-CAPTURE sets a new standard in portable USB 2.0 audio interfaces.
Half-rack, high-speed USB audio interface

Key Points
  • USB Audio Interface
  • 10 Inputs / 10 Outputs
  • Dedicated Monitor Output
  • Built-In Limiter

  

Roland UA1010 Octa-Capture USB Audio Interface 10 In x 10 Out

Features ten inputs, ten outputs, eight VS PREAMPS, and superb 24-bit/192 kHz audio quality, OCTA-CAPTURE sets a new standard in portable USB 2.0 audio interfaces.

The UA-101 is a half-rack, high-speed USB audio interface designed to turn your USB 2.0-ready computer into a powerful digital audio workstation. No other computer connection is required to get a full 10 inputs and 10 outputs at 24-bit/96kHz to the computer. The UA-101 is built to offer low latency and extraordinary stability. It’s the easiest-to-use yet most-powerful compact audio interface available.

 

  • Dedicated monitor output
  • Balanced I/O
  • Included Signal Router/Mixer application
  • Built-in limiter
  • 40-bit internal processing
  • MIDI I/O
  • Optical S/PDIF (ch. 9-10)
  • Low-latency drivers: WDM, ASIO 2.0
  • High-speed USB (USB 2.0) and full-Speed (USB 1.1) compatible

    Features

    Dedicated Monitor Output
    The UA-101 offers dedicated monitor outputs, kept separate from its channel outputs 1-8.

    All Balanced I/O
    The UA-101 features all-balanced inputs and outputs with input level selection switches on inputs 3-8, offering either +4dBu or -10dBu levels.

    Included Signal Router/Mixer Application
    The UA-101 comes with a powerful software application that allows you to route your inputs to various outputs and adjust your input monitor mix. This application allows the UA-101 to be reconfigured in a variety of ways without requiring any cable swapping or changes in your DAW application.

    Built-In Limiter
    The UA-101 allows you more freedom in setting your recording levels with the built-in limiter. Prevent clipping in your recordings. Get high-quality studio recordings with a wide dynamic range. No more worry about clipping a live recording or losing valuable signal because of brief loud transients.

    Superb Audio Fidelity with 40-bit Internal Processing
    The UA-101 uses premium analog components perfectly matched to its A/D converters for incredible fidelity. All audio is processed internally at 40-bit resolution to ensure accurate recording.

    MIDI I/O
    The UA-101 offers both MIDI input and output to connect external MIDI devices to your DAW.

    Optical S/PDIF Input and Output
    Channels 9 and 10 are dedicated S/PDIF digital channels, offering convenient connection to DAT, Minidisc, or other digital sources and destinations at up to 96kHz.

    Low-Latency Driver Support
    The UA-101 offers incredibly low latency through both WDM and ASIO 2.0 support for superior performance in your home studio.

    High-Speed USB (USB 2.0) and Full-Speed (USB 1.1) compatible
    The UA-101 is the first multi-channel high-speed USB audio interface to offer basic compatibility with USB 1.1. When connected through USB 1.1, the UA-101 will function as a stereo audio interface at 44.1 or 48kHz with any Win98 or later PC or Mac OS 9 or Mac OS X computer. When connected to Windows XP computer running USB 2.0, the UA-101 offers the full set of I/O options to your computer.

    Specs


    Number of Audio Record/Playback Channels
    44.1/48/88.2/96 kHz
    Record: 10 channels
    Playback: 10 channels
    Full duplex
    192 kHz
    Record: 6 channels
    Playback: 6 channels
    Full duplex
    Signal Processing
    PC interface
    24 bits
    AD/DA Conversion
    24 bits (linear)
    Sampling Frequency
    Digital output
    44.1/48/88.2/96 kHz
    Digital input
    44.1/48/88.2/96 kHz
    AD/DA Conversion
    44.1/48/88.2/96/192 kHz
    Frequency Response
    96.0 kHz
    20 Hz to 40 kHz (+1/-1 dB)
    88.2 kHz
    20 Hz to 40 kHz (+1/-1 dB)
    48.0 kHz
    20 Hz to 22 kHz (+1/-1 dB)
    44.1 kHz
    20 Hz to 20 kHz (+1/-1 dB)
    Nominal Input Level
    Input Jack 1--2 (XLR type)
    -50 to -10 dBu
    Input Jack 1--2 (1/4 inch TRS phone type)
    -35 to +4 dBu
    Input Jack 3--8
    -10 dBu/+4 dBu (balanced)
    Nominal Output Level
    Output Jack 1--8
    +4 dBu (balanced)
    Residual Noise Level (Typical)
    Output Jack 1--8
    -97 dBu
    S/N RATIO (Typical)
    OUTPUT
    107 dB
    INPUT
    101 dB
    Interface
    USB (Hi-Speed, Full-Speed)
    Digital input/output: Optical type (conforms to IEC60958, S/PDIF)
    MIDI IN/OUT
    Connectors
    Front Panel
    Input Jacks 1-2 (XLR type / 1/4 inch TRS phone type)
    XLR type (balanced / phantom power +48 V)
    1/4 inch TRS phone type (balanced)
    Digital In Connector (Optical type)
    Digital Out Connector (Optical type)
    Headphones Jack (Stereo 1/4 inch phone type)
    Rear Panel
    Input Jack 3-8 (1/4 inch TRS phone type (balanced))
    Output Jack 1-8 (1/4 inch TRS phone type (balanced))
    Monitor Output Jack (L, R) (1/4 inch TRS phone type (balanced))
    MIDI Connectors (In, Out)
    USB Connector
    Others
    Power Supply
    DC 9 V (AC adaptor)
    Current Draw
    1 A
    Accessories
    Owner's Manual
    System Requirements
    In case of USB 2.0 (Hi-SPEED USB) [Windows]
    OS
    Microsoft® Windows® XP Home SP1/XP Professional SP1
    Computer
    Windows XP compatible computer equipped with a USB 2.0 (Hi-SPEED USB) port
    CPU/Clock
    Pentium® III, Pentium® 4, Pentium® M Processor 1.2 GHz or higher.
    Memory(RAM)
    256 MB or more
    System Requirements
    In case of USB 1.1 (Full-SPEED USB) [Windows]
    OS
    Microsoft® Windows® XP Home/XP Professional/Me/2000/98SE
    Computer
    Windows XP/Me/2000/Me compatible computer equipped with a USB 1.1 (Full-SPEED) port
    CPU/Clock
    Pentium®, Celeron® or Intel compatible processors / 600 MHz or higher
    Memory(RAM)
    128 MB or more
    System Requirements
    In case of USB 1.1 (Full-SPEED USB) [Macintosh]
    OS
    Mac OS X 10.2.3 or later
    Mac OS 9.x
    Computer
    Apple Macintosh series with on-board USB port
    CPU/Clock
    PowerPC G3/600 MHz or higher (PowerPC G4 is recommended)
    Memory(RAM)
    256 MB or more* 512 GB or more is recommended in Mac OS X
    Software
    OMS 2.3.5 or later
    FreeMIDI 1.35 or later (Mac OS 9.x)
    Size and Weight
    Width
    218 mm
    8-5/8 inches
    Depth
    159 mm
    6-5/16 inches
    Height
    45 mm
    1-13/16 inches
    Weight
    1.2 kg
    2 lbs. 9 oz.



Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.

#
Shop by Brand
The Store
sagepay