Yamaha FG-TA TransAcoustic Guitar In Black Finish
FG-TA TransAcoustic Guitar In Black.
The Yamaha TransAcoustic Guitar recreates that incredible experience without needing any external amplification or effects, just the guitar itself. It’s the most inspiring, engaging acoustic guitar you’ve ever played.
Traditional western body
Solid spruce top
Mahogany back & sides
Amazing sounding reverb/chorus built-into the guitar with no need for external amplification or effects
New scalloped bracing for louder, richer acoustic sound
Actuator
An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.
Simple Controls
Three simple knobs let you adjust the degree of effect applied and the lineout volume level. Additionally, keeping the controls small minimizes the area of the holes in the body material, reducing acoustic sound loss.
(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control
- Pressing the TA Switch for more than 0.3 seconds activates the TA function.
- When a cable is connected to the line-out jack, the lineout volume can be adjusted by rotating the (C) knob.
- The reverb type switches from Room to Hall around the 12:00 position.
Newly Designed Battery Box
Battery box integrated into the end-pin jack. This requires fewer holes in the body, thus reducing acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic electric guitar.
Body Shape: Traditional Western
Scale Length: 650mm (25 9/16”)
Body length: 505mm (19 7/8″)
Total Length: 1038mm (40 7/8″)
Body width: 412mm (16 1/4″)
Body depth: 100-118mm (3 15/16″ – 4 5/8″)
Nut width: 43mm (1 11/16″)
String spacing: 11.0mm
Top material: Solid Spruce
Back material: Mahogany
Side material: Mahogany
Neck material: Nato
Fingerboard: Rosewood
Fingerboard radius: R400mm (15 3/4″)
Bridge: Rosewood
Nut material: Urea
Saddle material : Urea
Bridge pins: Black ABS with White Dot
Tuners: Die-cast Chrome(TM29T)
Body binding: Cream
Soundhole inlay: Black + White
Pickguard: Transparent
Body finish: Gloss
Neck finish: Matt
Electronics: SYSTEM70 TransAcoustic + SRT Piezzo Pickup
Controls: Reverb / Chorus / TA Switch / Line Out Vol
Connections: Line Out
Strings: Yamaha FS50BT or D’Addario EXP11
Accessories: Hex Wrench, 2 x AA Batteries
Case/Bag: not included
Product ID GFGTABL
