ART MyMONITOR II Headphone Amp

Normally: £122.00
Discount Price: £112.00
Share |

Normally £122.00
Saving you £10.01 (8% Off)
BUY IT NOW FOR £112.00 Add to Cart

ART MyMONITOR II Headphone Amp

Mixes any microphone, instrument and stereo signal.
For live and studio applications

Key Points
  • Blend any Mic source
  • Ideal monitoring solution
  • High performance
  • Low noise


ART MyMONITOR II Headphone Amp

Mixes any microphone, instrument and stereo signal.



The MYMonitorII allows blending of any microphone source with any stereo source in a convenient personal monitoring solution. The microphone thru provides direct connection to any mixer and will pass phantom power from the board for powering condenser microphones.

Built for maximum flexibility, the ARTcessories MyMonitorII can be powered with the supplied 12vDC power supply, or from an internal 9v battery.

The pop-less microphone on/off switch lets you locally mute the microphone. The headphone section has independent 1/8-inch and ¼-inch TRS outputs with plenty of drive for both.

Key Features

Blends any Microphone, Instrument and Stereo Source for Personal Monitoring Microphone Input and Thru with Pop-less On/Off Mute Switch Passes Phantom Power for Operation with Condenser Microphones Instrument/Line Input and Thru Jacks Stereo Monitor Input with Blend Control Headphone output section has 1/8-inch and 1/4-inch Jacks High Performance, Low Noise Circuitry 9v battery and 12vDC Power Operation

Maximum Input Level     +6 dBu (mic), +12 dBu (instrument),
+32 dBu (line), >+32 dBu (stereo monitor)
Input Impedance     4.5k Ω (mic), 1m Ω (instrument),
100k Ω (stereo monitor, line)
Maximum Output Level     +12dBu (headphones)
Maximum Gain     47dB (mic), 41dB(instrument), 21dB(stereo monitor, line)
Output Impedance     47 Ω (each headphone output)
Input Connections     XLR balanced microphone, 1/4-inch stereo monitor,
1/4-inch mono instrument/line input
Output Connections     XLR balanced microphone, 1/4-inch and 1/8-inch headphones, 1/4-inch mono instrument/line thru
Signal To Noise Ratio     > 96dB
Power     12VDC @ 150mA (Adaptor Included) or 9VDC Battery
Dimensions     1.85″H x 4.6″W x 4.1″D (47mm x 117mm x 104mm)
Weight     1.10 lbs (0.50kg)
ART Pro Audio

Important Note
Price errors and omissions excepted - An order is considered finalised on dispatch. No monies are debited from your card until the item is in stock or by prior arrangement.

Shop by Brand
The Store